![]() Important: You must reset the Wi-Fi base station using the reset switch to re-enable checking for the conditions you ignored. ![]() Respond to each item until there are no more items listed. The Status window lists any conditions that require your attention.When the Summary window appears, double-click the amber circle to the right of Wi-Fi base station Status to open the Status window.Note: If you have more than one Wi-Fi base station, double-click on the icon for the Wi-Fi base station that has the amber circle next to it. In the AirPort Utility window, locate your Wi-Fi base station and double-click on it to open the Summary window.Note: You may also locate and download the latest Wi-Fi base station firmware and software by clicking here.In Microsoft Windows, AirPort Utility can be located by clicking Start > All Programs > AirPort.In Mac OS X, AirPort Utility is located in the Applications > Utilities folder.You may also choose to launch AirPort Utility at any time.? Do not use any version of AirPort Utility earlier than 5.0. AirPort Utility 5.2 or later opens automatically if your Wi-Fi base station requires your attention.?Apple recommends that you use AirPort Utility 5.5.2 for Mac, AirPort Utility 5.5.2 for Windows, or a newer version of AirPort Utility if one is available. Launch AirPort Utility to determine why your Wi-Fi base station status light is blinking amber. How to resolve a blinking amber status light alert Your Time Capsule has detected that the internal hard drive has reported a SMART error, and is failing.Ī persistent, blinking, amber status light indicates that your Wi-Fi base station may require your attention.Internet access may be temporarily unavailable from your internet service provider (ISP).The Wi-Fi base station lack a path to the Internet (or local router).The WAN Ethernet cable is unplugged from the Wi-Fi base station.A Wi-Fi base station in Extended Mode is out-of-network Wi-Fi range of a primary Wi-Fi base station.No IP address is available for the Wi-Fi base station.A new firmware update is available for the Wi-Fi base station.The Wi-Fi base station has not yet been configured because it is new.Resolution Here are some of the more common reasons that the status light may blink amber: And in my life.Symptoms Your Wi-Fi base station status light blinks amber. You’ll see that option available to you again on the selected device. Then just wait for the installation process to complete, and you’re done! If you decide that you’d like to give the problematic version another try at some point, all you have to do is go back to AirPort Utility. When you pick the firmware version you want, AirPort Utility will warn you that your device is about to go offline, of course. Here’s where the magic happens-if you Option-click on the version number shown there, you can revert back to a previous one really quickly. When you click on any device and enter its password, you’ll be given a list of its basic info. Once you’ve got AirPort Utility running, you should see your available Apple networking devices appear in the window (and if you don’t, be sure you’re on your home network and not, say, a neighbor’s or the godawful xfinitywifi one).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |